Gear

Useful Tips to Build a DIY Gaming Personal Computer

By  | 

gaming pc

Did you know that you can build your own gaming computer? Yes, you heard that right! It is possible.

If you know how to build your own computer, you can customize it accordingly. It will also cost you less than buying a brand new computer.

On the other hand, you can also consider buying a prebuilt gaming personal computer. According to popular opinion, it is quicker, easier and more reliable to get one of these.

Some people may prefer to build their own computers to meet the demands of specific games. Here’s how to do it:

 

Advantages of Building Your Own PC

At first, we’re going to look at the advantages of building your own PC starting with the most important benefit. When you build your own PC, you can handpick every part of the system according to your taste.

It saves you money and allows you to fine-tune the system the way you want it. However, you have to be knowledgeable about the price and quality of the different components, so that you can land a good deal.

Because you’re going to be designing the computer from scratch, you will need lots of time on your hands. Some people may even choose to wait for the best deals, or purchase refurbished or previously owned products.

If you’re worried that this sounds like a lot of work, you can just settle for a PC Gaming Bundle. The ones on our list are cheaper than their competitors and designed specifically for gamers.

Check out https://www.pcpowerzone.co.uk/gaming-pcs/cheap-bundle/ to browse through the different options.

If you do decide to do it yourself, building your own PC will make you feel accomplished and give you a platform to show off to other gamers all over the world.

Regardless of the satisfaction, building your own computer is time-consuming, stressful and exhausting. So, make sure you have weighed up all your pros and cons before you begin.

 

How to Build a DIY Gaming PC

Experts suggest that you should build your personal computer on a table or a flat surface away from carpets. This is so you can avoid static electricity.

You should also touch a grounded metal object before touching your PC parts to eliminate any charge that was built-up in your body. In addition, you will want to work where there is plenty of light.

You will also need a Phillips #2 screwdriver. But if you’re installing an M.2 device, you can use a Phillips #0 screwdriver. Make sure to use magnetic screwdrivers so that you don’t lose the tiny screws.

Apple Cheese Grater Style PC Case

Gaming PC Cases

Choose a PC case according to where you’ll store it. Typically, they come in three sizes, namely a mini-tower, a mid-tower, and a full-tower. The mini-tower cases can fit small motherboards like the mini-ITX motherboards.

The mid-tower cases can fit motherboards that are standard full size, like the ATX motherboards. Finally, the full-tower cases can hold the Extended-ATX motherboards.

 

Hardware Components

Before you buy any component from the store, make a list of what you need. If you want to customize your PC according to certain games, you may find this link quite helpful.

Usually, you will require the following hardware components to build your own PC:

A motherboard

A Central Processing Unit (CPU)

Storage (SSD or HDD)

A graphics card

Memory (RAM)

A CPU cooling system

A Power Supply Unit (PSU)

A monitor

A case

An operating system

A keyboard, headphones, and mouse

 

A Step-By-Step Guide

Now we’re going to give you a step-by-step guide to creating your own gaming PC.

Gaming PC

Installing the CPU

Be gentle when you unpack the CPU and the CPU socket as they can get damaged easily. Make sure you don’t touch the pic that is at the top and bottom of the chip. To open the socket tray, you have to press down on the lever, then pull the lever away from the socket.

As you place the CPU gently on a surface, lower down the retention lever to put it back into place.

 

Installing the M.2 SSD

To install the M.2 SSD, remove the screw from the M.2 slot on the motherboard. Then all you have to do is slide the M.2 SSD into the designated slot. Push the SSD down and lock it in place with a screw.

 

Installing the CPU Cooling System

To install the CPU cooling system, you will need the CPU cooler manual, CPU cooler, the motherboard with the installed CPU, and thermal paste. Notice whether your motherboard has a bracket before you put it inside the case.

If the motherboard has a bracket installed previously, you may need to remove it if your cooler doesn’t need one. In the same way, some coolers may come with thermal paste while others won’t. Apply the thermal paste manually on your cooler if it doesn’t have it already.

Squeeze a small dot in the middle of the CPU, then fit the cooler on the CPU. The pressure will eventually spread the thermal paste all over.

 

Installing the Memory

Fill up the available spots with RAM. Use the manual to configure correctly if you’re not going to be using all the RAM slots.

 

Test Running

You can’t perform this test run once everything has been installed, so you should do it right now. After installing the GPU, check if the power supply is connected to everything – the GPU, CPU 8-pin and 24-pin and the motherboard.

Depending on the type of motherboard you’ve purchased, you may have power buttons or just power switch pins. Tap both the switch pins with a screwdriver at the same time to turn it on.

What happens next is going to determine if everything is okay or not. Follow the user manual for exact details. Before proceeding to the next step, uninstall the GPU and unplug everything.

CUSTOM-GAMING-DESKTOP-PC-RIG

Mounting the Power Supply

The PSU has to be fit in such a way that the fan faces outwards. If your case has a vent at the bottom, the PSU can be mounted upside down. For those of you who have ended up with a ventless case, make sure that the PSU is mounted facing up and has enough clearance.

 

Installing the Motherboard

Install the motherboard after the attached I/O shield has been put in place. However, before you do it, check that all the cables are connected.

Hold the motherboard in place with the Phillips #2 screwdriver. The center screw is the first screw you should mount.

Then, slowly mount all of the screws into the motherboard. Finally, connect the motherboard to the 8-pin and 24-pin CPU connectors.

 

Installing the GPU

Place your GPU in the longest PCle*x16 slot. Make sure the GPU has enough room to breathe.

For that reason, even if you must remove the I/O cover, do so. Lastly, secure the GPU with screws and connect it to the power supply.

 

Installing the Storage

Pull out the tray after the lever or the switch has been unlocked. Place the storage drive in the tray. The size of your storage maybe 2.5 inches (HDDs and SSDs) or 3.5 inches (HDDs).

You may see a metal bracket with holes, which is where you have to place the storage if you don’t have tool-free bays. Slide the storage drive between the brackets and then screw it in properly. Lastly, connect it to the motherboard with a SATA cable.

gaming PC

Installing the Operating System

Choose which operating system you want to install, whether you receive it in a flash drive or on a CD. If you’re using a flash drive, change the boot order to flash drive first.

Make sure all the components you set up are being recognized by the operating system. Your computer should boot from the USB drive once you restart the computer. Follow the instructions afterward.

 

Bottom Line

Building your own personal computer requires patience and perseverance. You may not be able to build a computer in one go. Sometimes you may need to change some of the components and try several times until you reach your final goal.

But don’t lose hope. If you want to save costs and you want your computer to have your personal touch, keep trying until you make it!

We’ve tried to make the steps easier to understand and we hope you liked this article. However, you should do your own research and experiment in order to create your own masterpiece. We wish you the best!

Loading...

You must be logged in to post a comment Login