Featured

Valve Has Downgraded The Steam Deck SSD on Some 256GB and 512GB models

By  | 

Steam Deck

If you bought a Steam Deck, there’s something you should know. Valve recently pinched the listed specs, meaning you could potentially land a model with a downgraded SSD.

The change impacts the 256GB and 512GB devices, but not all of them, so you won’t know if you’re getting the slower storage until you actually have it in your hands.

The news slipped under the radar, but apparently Valve did some testing and, in late May, decided that some Steam Decks would be coming with a PCI express 3.0 x2 SSD instead of the initially specified x4 SSD.

Using only two lanes of the PCIe interface means the drive has half the potential bandwidth of a four-lane connection. And SSDs specced out with an x2 interface are generally slower in themselves, too.

Under the storage heading in the spec table, the Steam Deck site now reads:

256 GB NVMe SSD (PCIe Gen 3 x4 or PCIe Gen 3 x2*)
512 GB high-speed NVMe SSD (PCIe Gen 3 x4 or PCIe Gen 3 x2*)

*Some 256GB and 512GB models ship with a PCIe Gen 3 x2 SSD. In our testing, we did not see any impact on gaming performance between x2 and x4.

A quick check on the Wayback Machine(opens in new tab) confirms this detail was only added after May 28, since May 27 clearly states both 256GB and 512GB drives will run on the x4 NVMe interface, as reported by Hardware Luxx(opens in new tab). Valve is adamant that the change won’t impact gaming performance, but there’s no mention of load times or responsiveness, which we would expect to have taken a dip.

If you want to find out which version you have, hold down your Steam Deck’s power button and select Desktop Mode. Then search Device Viewer in the Applications Menu search bar. Under Devices, go to Storage Drives, and tap the Hard Disk Drive.

In the right panel, it’ll have a code. Our 512GB review model has a Phison ESMP512GKB4C3-E13TS drive. That seems to be a custom 2230 SSD using Phison’s Gen3 x4 E13 controller. So, you want to check whether your code ends with -E13T, too, or something else entirely. If it includes a code like -E08 (Phison’s Gen3 x2 controller) then your Deck is one of those with a drive running on a Gen3 x2 interface.

If you look at the changes in performance on the Phison website between the E13 and E08 controllers, you’re talking about potentially splitting the peak writing performance of the drive.

Though it is worth mentioning that even an x2 NVMe SSD will be double as quick as a standard SATA SSD, and far slicker than an old spinning platter hard drive.

It’s unclear why Valve decided to change the specs, but I’m guessing those who were unaware of the change, and have already made their buy, may have something to say. We’ll update as soon as we hear anything back from Valve on the reasoning behind the change, and whether it will affect the speed of the gadget in real terms.

You must be logged in to post a comment Login